The TECHART Carbon Sport package for the Porsche 911 GT3 & 911 GT3 RS.
Hardly any other road-approved sports car embodies the joy of motorsport as much as the 911 GT3 RS.
The TECHART Carbon Sport package for the Porsche 911 GT3 & 911 GT3 RS . By unveiling the new Porsche 911 GT3 RS (991.2 series) lizard green . Engineers are reviving the camouflage color of the AMG GT R from the green hell or racing driver’s paradise or the TechArt GTstreet R. This color suits both cars and in an increasingly silver, black and white package, it is a revolution .
The exterior of the Porsche 911 GT3 RS shows from afar that it is a copy on steroids from the in-house tuner Weissach.
The most powerful naturally aspirated engine of all time in the Porsche 911 GT3 RS
The mainstream is clear, the naturally aspirated engine will one day be a thing of the past, even at Porsche. In the meantime, Porsche is putting a powerful naturally aspirated 4.0-liter engine from the Cup model into the new GT3 RS. Somewhat mellowed and adapted to everyday driving, the flat six develops 520 hp, 20 hp more than the “normal” Porsche 911 GT3. The 470 Nm of torque are available from 6000 rpm.
The remnants of this necessary advanced engineering escape through the two fist-sized exhaust outlets with a high-flying sound .
For all the manual transmission enthusiasts, the new 911 GT3 RS comes exclusively with PDK. With its 7 gears, the dual-clutch gearbox is more imposing and even heavy, but in terms of shift times essential for fast laps no manual gearbox can compete.
- The Porsche 911 GT3 RS goes from 0 to 100 km/h in 3.2 seconds.
- The end of the race is reached at 312 km/h.
Racing feeling thanks to aerodynamics and motorsport engineering
There is no doubt that the genes of the Porsche 911 GT3 RS come from racing. The design of this engineering feat is partly reminiscent of a mixture of the GT3 and the Porsche 911 GT2 RS.
- The side skirts of the GT3 RS have only been slightly modified compared to the GT3. The rear spoiler loses its third strut like on the GT2 RS. The new spoiler is 6 cm higher than in the GT3.
- The air outlets on the front wings are defined. In order to clearly distinguish itself from the Porsche 911 GT2 RS, the GT3 RS has retro lettering along the rocker panels.
- The air intakes on the front hood are used for direct ventilation of the front brakes. This eliminates the need for bottom ventilation, allowing more downforce on the front axle.
- In harmony with the more powerful engine, Porsche has developed a chassis setup that, with its recalibrated rear axle steering, is designed for maximum dynamics and precision.
- The chassis, which incorporates engineering and motorsport characteristics, is intended to provide superior driving dynamics.
- The ball joints mounted on all steering arms offer greater precision than the usual elastocinematic bearings.
- Lightweight 20-inch wheels with newly developed 265/35 sport tires on the front axle enhance agility and handling, while lightweight 21-inch wheels with 325/30 tires on the rear axle provide the necessary traction.
Clubsport and Weissach packages to optimize the Porsche 911 GT3 RS
In the meantime, a Clubsport package is available at no extra cost for each GT model. The Porsche 911 GT3 RS is thus equipped for use in motorsport. The already very clean interior becomes even more sporty.
A roll bar, a Motorsport manual fire extinguisher, pre-equipment for a battery cutter and a six-point harness, combined with full carbon bucket seats, light door panels with storage net and opening loops, as well as reduced insulation and the new lightweight rear cover, give the true feeling of a race car.
The Weissach package adds another layer for all track and racing enthusiasts. Weissach’s Motorsport engineers provide a weight reduction package and reduce the weight of the GT3 RS to 1,430 kilograms.This is made possible by additional carbon components in the areas of chassis, interior and exterior, as well as optional magnesium wheels.
Market launch and price
The new 911 GT3 RS can be ordered now from . The base price of the high-performance sports car is 195,137 euros.
TECHART upgrades the Porsche 911 GT3 with full carbon aerodynamic kit
After having updated the 911 Carrera, Targa and the 911 Turbo with the Techart GT Street R, it is now the turn of the 911 GT3 (991 MK2) to benefit from the talent of the in-house engineers.
TECHART is well known in the Porsche world for its work on all Porsche models. Appreciated for its unmatched precision and know how, TECHART shows its know-how by using materials such as carbon fiber, leather skins, Alcantara® and extreme precision engineering.
Techart is a favorite of many Porsche purists and enthusiasts around the world.
Handcrafted Techart
The Carbon Sport aero packs use full carbon fiber parts, available in matte, gloss and forged finishes.
These kits are custom made and allow the use of either finish depending on your wishes. In order to offer you the most advanced customization possible, TECHART offers you a wide variety of parts
Techart: you can replace all the Genuine parts of your Porsche, whether it is the air intakes or the wing profiles, or even the Sport Design mirrors.
Techart has all the necessary parts to offer you a kit that suits your image.
Techart fully customizable
Specially developed for the 911 GT3, TECHART offers a Carbon Aerodynamic Pack composed of parts as always made entirely of carbon fiber that will allow you to customize your GT3 at will.
Available in glossy matte and forged finish, you will be able to configure its lightened hood with integrated air outlet, its spoiler, its side skirts, its rear spoiler profile and sides skirts as well as its rear diffuser.
For a design still worthy of racing cars, Techart offers TECHART Formula IV Race 20-inch forged wheels with central locking nut.
The multi-spoke design is perfectly matched to the 911 GT3 design and is technically compatible. These wheels are lightened by the use of a special forging process and treatment to achieve a particularly light weight.
At Techart nothing your imagination has no limit, you can choose the color of these rims and match it with the brake calipers. You can even customize them with interior decorative elements, two-tone or multi-tone paint, a matte surface finish or a distinctive wheel rim in a contrasting color. You can customize your wheels down to the smallest detail and design them to your image. You can equip the 911 GT3 with TECHART carbon titanium alloy sport exhaust tips.
Techart plays the card of being exclusively yours
Techart offers you a program to customize the interior of your GT3 to your image. Whether it’s color-coordinated instrument dials, aluminum sport pedals or illuminated custom door entry covers, the only limit is your imagination.
The only limit is your imagination.
The handcrafted TECHART Sport Steering Wheel is made of alcantara leather and has the most sophisticated design. All Techart steering wheels are the result of precision engineering.
With a diameter of 360 mm and an ergonomic design, the Techart Type 7 sports steering wheel will catch your eye with its combination of painted surfaces, leather and Alcantara® segments as well as carbon fiber trim, matching piping, contrasting stitching and perforations. All of the standard features of the original steering wheel will be retained, including the paddles and steering wheel heater.
The TECHART Carbon Sport package for the Porsche 911 GT3 & 911 GT3 RS.
TECHART Carbon Sport package for the Porsche GT3 RS
A real weight loss: TechArt carbon kit also for the 911 GT3 RS
Even if it’s a minimal weight gain, the TechArt team is the best equipped to make aesthetic and other improvements to the 991 series Porsche GT3 RS, which develops 500 hp. And the carbon is still and always particularly put has contribution. It is therefore logical that the 991, but also the sportiest, aero kit in real carbon, at the request of the customer. The engine hood and the trunk of the 991 GT3 RS are already made of carbon from the factory, so the apparent carbon applications are not far from reality but a real optimization .
Techart Porsche 911 GT3 RS intelligent lightweight construction
Whether air intake or outlet covers, SportDesign exterior mirrors, fender liners or rocker panels, whether satin or glossy: in the program, every carbon lover should find something to suit.
However, the GT3 RS is a racer par excellence, with or without the carbon aerodynamic elements: 500 hp and 460 Newton meters from a naturally aspirated four-liter boxer six-cylinder allow the 991, including the PDK gearbox, to accelerate from 0 to 100 km/h in just 3.3 seconds and to reach 200 km/h from a standing start in 10.9 seconds.
The car costs 181,690 euros and for the TechArt aerodynamic kit, don’t hesitate to contact us
TECHART 911 GT3 RS Lizard Green
The TECHART Carbon Sport package for the Porsche 911 GT3 RS.
With the Carbon Sport Package for the 991.2 generation, TECHART offers the opportunity to visibly enhance this racetrack feeling. Individuality guaranteed.
An even sportier appearance. A noble enhancement of the striking exterior parts. Showing what the GT3 RS can do. This is the idea behind the TECHART carbon sports package, which makes the customised Porsche vehicles stand out from the standard models in an immediately recognisable way. Whether it is the profile of the rear wing or the typical NACA air intakes on the front hood, functional components become a high-quality styling element with TECHART visible carbon.
TECHART aerodynamic and styling products made of carbon fiber stand for low dead weight and precision manufacturing. Thanks to in-house production in the TECHART factory, original TECHART carbon components offer the typical TECHART freedom for further customization. Matte or glossy surfaces and even individual color matching by means of varnish layers are possible. The combination of perfectly processed carbon and an impeccable surface finish makes these parts a high-quality styling element in the direct field of vision. Noble and sporty at the same time.
Individuality also in the composition
The TECHART carbon sport package for the 911 GT3 RS can be put together in different ways. For a complete motorsport appearance or for selected highlights. Depending on the component, either full carbon fiber parts or original parts with a high-quality real carbon coating are used. The result: perfectly homogeneous visible carbon surfaces, combined with optimal dimensional stability and ease of assembly.
The following carbon fiber perimeters are available for the 911 GT3 RS (991.2):
TECHART carbon coating
- Front spoiler
- Air slats
- Slats of the wheel arch side ventilation
- Slats of the side air intake openings
- Side skirts
- Tailgate trim
- Sport mirrors
- Mirror triangles
- Diffuser
- Rear apron trim
TECHART carbon component
- Aerodynamic front hood
- Roof spoiler
- Rear wing profile
- Rear wings
- NACA air intakes
The TECHART Carbon Sport package for the Porsche 911 GT3 & 911 GT3 RS.
A particularly sporty touch is available from € 6,750.00 with the aerodynamic front hood in visible carbon. In addition, we recommend the use of the wheel arch vents (€ 1,450.00), the front spoiler (€ 2,790.00) or the rear diffuser (€ 1,590.00). All prices are exclusive of VAT.
More information on